JHB-750 FLOOR-STANDING
WATER COOLERS
FLOOR-STANDING COMMERCIAL WATER DISPENSER FOR PROFESSIONAL USE
A floor-standing commercial water dispenser with hot and cold water and a four-stage filtration system, suitable for residential and office environments. Configuration can be customised for specific market and brand requirements.
DIMENSION
260mm(W) × 410mm(D) × 1,100mm(H)
TANK CAPACITY
2.8 ℓ (Cold) / 1.8 ℓ (Hot)
HOT WATER POWER
300W
CONDENSER
Wire Condenser
ALLOWABLE WATER TEMPERATURE
0 ~ 35°C
WEIGHT
22kg
COMPRESSOR POWER
100W
VOLTAGE
Customizable (as per customer requirements)
FILTRATION
4 Stages (Customizable)
WATER COOLERS
COMPACT COUNTERTOP COMMERCIAL WATER DISPENSER FOR FLEXIBLE INSTALLATION.
A compact countertop hot and cold water dispenser designed for locations where installation space is limited. Configuration can be customised for specific market and brand requirements.
DIMENSION
260mm(W) × 480mm(D) × 498mm(H)
WEIGHT
17kg
TANK CAPACITY
2.8 ℓ (Cold) / 1.2 ℓ (Hot)
COMPRESSOR POWER
100W
JHB-751 COUNTER TOP
HOT WATER POWER
300W
VOLTAGE
Customizable (as per customer requirements)
CONDENSER
Wire Condenser
FILTRATION
ALLOWABLE WATER TEMPERATURE
4 Stages (Customizable)
0 ~ 35°C
JHB-750 / JHB-751 TECHNICAL SPECIFICATIONS
PRODUCT SPECIFICATIONS
Model
JHB-750 / JHB-751
Rated Power
Customizable (as per customer requirements)
Dimensions (W × D × H)
260 × 410 × 1100 mm / 260 × 480 × 498 mm
Weight
22 kg / 17 kg
Cold Water Tank
2.8 Liters
Hot Water Tank
1.8 Liters / 1.2 Liters
Compressor
100 W
Heater
300 W
Indicators
Power, Cold, Hot
Condenser
Wire Condenser
Permitted Water Temperature
0–35°C
Cold Water
4–8°C
Hot Water
75–85°C
IP Rating
IPX1
Usage
Indoor (Residential & Office)
Cold Control
Thermostat
Hot Control
Thermistor
Cooling
Forced Air Cooling
Heater Type
Sheath Heater
Dispenser
Tap Dispenser
Overheating Prevention
Bimetal (Ceramic)
Water Pressure
0.5–4 kgf/cm²
4-STAGE FILTRATION SYSTEM
FILTRATION SPECIFICATIONS
Sediment Filter
Filtration accuracy 5 microns; maximum flow 4 GPM; maximum pressure 120 PSI; maximum temperature 113°F (45°C).
Pre-Carbon Filter
coconut shell-based granular activated carbon; iodine value over 1,050; particle size 20 × 40 mesh; maximum flow 4 GPM; maximum pressure 120 PSI; maximum temperature 113°F (45°C); complies with NSF/ANSI 42.
UF Membrane Filter
0.1 microns, hollow fiber; maximum flow 1 GPM; maximum pressure 120 PSI; maximum temperature 113°F (45°C); complies with NSF/ANSI 42.
Block Carbon Filter
coconut shell-based block activated carbon; particle size 80 × 325 mesh; maximum flow 4 GPM; maximum pressure 120 PSI; maximum temperature 113°F (45°C); complies with NSF/ANSI 42.
Optional Configuration
RO with or without pump; UV lamp or UV filter; both options only for stand-type models.